Page 16 STT850 Series HART/DE Option User’s Manual Revision 4.0
4.3.2 Device Information Configuration
In this and subsequent procedures, the notations R for read only and R/W for read/write are used to
indicate if a parameter can be edited.
1. On the DE MAIN MENU, select Device Info. The DEVICE INFO box will be displayed.
Typical DE Device info dialog with Type and firmware details is shown here.
2. Configure device information according to Table 4.
Table 4 – Device Information Parameters
Read (R) or
Read/Write (R/W)
User ID up to 8 alphanumeric characters.
Manufacturer’s device type identifier
Manufacturer’s firmware version identifier
Up to 32 alphanumeric characters
3. Select the Back button to go back to the DE MAIN MENU.
To Next Page
Loading...
