Honeywell STT850 Series - 8 HART Advanced Diagnostics; About this Section; Advanced Diagnostics; Install Date

Revision 4.0 STT850 Series HART/DE Option User’s Manual Page 83
8 HART Advanced Diagnostics
8.1 About This Section
This section provides information about the Advanced Diagnostic features in the STT850 SmartLine
Temperature Transmitter.
8.2 Advanced Diagnostics
Table 14 – Viewing Advanced Diagnostics
What you want to view
What to do
 Install date
 PV (Process Variable) Tracking
Diagnostics
 SV (CJ Temperature) Tracking
Diagnostics
 ET (Electronics Temperature) Tracking
Diagnostics
 Stress Life
 Service Life
 Operating Voltage Tracking Diagnostics
 AVDD (Sensor Supply Voltage)
Tracking Diagnostics
 Sensor CPU Temp. Tracking
 Power Up Diagnostics
Select Start/FDC to Launch the FDC application
on the MC Toolkit.
On the Home page, select Online and establish
connection with the device.
Select My Device\Diagnostics\Adv Diagnostics.
8.2.1 Install Date
Install Date
Parameter
Description
Date of device installation. Date displayed in mm/dd/yyyy
format where mm=month, dd=day, yyyy=year
Set-up
User enters a date once during device lifetime. Once
date is entered no further updates are possible and value
becomes read only and is permanently saved.