Honeywell STT850 Series - Monitor Status Configuration; Table 8 - Monitor Parameters

Page 20 STT850 Series HART/DE Option User’s Manual Revision 4.0
4.3.6 Monitor Status Configuration
With the DE MAIN MENU displayed, select the Monitor button. The MONITOR box will be
displayed. Typical Monitor Screen Based on the connected Device Model, Input Parameter and Units
will be displayed accordingly.
MONITOR status parameters are R (read only); Table 7 lists the status parameters.
Table 7 – Monitor Parameters
Parameter
Read (R) or
Read/Write (R/W)
Configuration Details
Input
R
Sensor input in EU
Output
R
Loop output as a percent of Span
SV
R
Secondary Variable in SV EU
Gross Status
R
Gross Transmitter Status. Select the Monitor menu
Device Status button to display device status.
Communication
Status
R
Refer to the “Messages and Diagnostic Codes” section
of the MCT404/202 Toolkit manual.
Select the Back button to go back to the DE MAIN MENU.