Revision 4.0 STT850 Series HART/DE Option User’s Manual Page 81
7.3.4 STT850 Calibration Records
A history of the date and time of the last three Calibration procedures is available for the HART
device. Run the Methods and follow the screen prompts to read the Calibration Records.
Select “My Device\Device Setup\Calibration” to select the following calibration records
Correct URV1 Records
Correct LRV1 Records
Correct URV2 Records
Correct LRV2 Records
Reset Corrects Records for Sensor1
Reset Corrects Records for Sensor2
Table 13 – Calibration Records
Date and Time of current LRV1 correct done
displayed in mm/dd/yyyy format
Date and Time of last LRV1 correct done
displayed in mm/dd/yyyy format
Date and Time of previous LRV1 correct done
displayed in mm/dd/yyyy format
Date and Time of current LRV2 correct done
displayed in mm/dd/yyyy format
Date and Time of last LRV2 correct done
displayed in mm/dd/yyyy format
Date and Time of previous LRV2 correct done
displayed in mm/dd/yyyy format
Date and Time of current URV1 correct done
displayed in mm/dd/yyyy format
Date and Time of last URV1 correct done
displayed in mm/dd/yyyy format
Date and Time of previous URV1 correct done
displayed in mm/dd/yyyy format
Date and Time of current URV2 correct done
displayed in mm/dd/yyyy format
Date and Time of last URV2 correct done
displayed in mm/dd/yyyy format
Date and Time of previous URV2 correct done
displayed in mm/dd/yyyy format
To Next Page
Loading...
Need help?
General
