Page 72 STT850 Series HART/DE Option User’s Manual Revision 4.0
f. Use the Increment or Decrement button, as necessary to adjust the output current to
20 mA. When the current reaches the 20 mA level, select Clear Output; the button
will change to half-intensity.
5. Change the display in output mode as follows:
a. Selecting the Back button before selecting the Clear Output button, you will be
prompted to confirm that you want to clear the output.
b. If you want to stay in output mode while viewing other displays, select Yes;
otherwise, select No and the Clear Output button.
To Next Page
Loading...
