Installation Instruction VARIODYN
®
D1 System
32 FB 798663.GB0 / 05.19
6.1.3 DOM Flex Applications for 2XD- and 4XD-Amplifier
Using DOM Flex applications, a DOM or VARIODYN
®
D1 Comprio can operate flexibly with the optimal number
of amplifier channels. All applications are compatible with existing components such as a DOM, VARIODYN
®
D1
Comprio, and amplifiers that comply with EN 54-16 certification.
The amplifiers are optimally installed according to their output, so that each amplifier channel operates with the
ideal number of loudspeaker lines.
This simply requires the use of relevant amplifier output cables and in the case of application 1–24, a connection
board.
Description Part No. Figure
Connection Board 583369
Output cable1-18
(1 channel up to 6 lines)
(1 channel up to 18 lines)
583430
Output cable 2-12
(2 channels each up to 12 lines)
583431
Output cable 1-24
(2 channels each up to 24 lines)
583432
Backup cable RC 41 VARIODYN
®
D1 583441.10
Input cable DOM amplifier
(0,5 m, green) audio frequency (AF),
control to power amplifier (PA)
583491 or
583491A
To Next Page
Loading...
Need help?
General
