Honeywell Versatilis Signal Scout - Setting Up the Honeywell Versatilis Signal Scout; Unpacking the Contents

CHAPTER
5
SETTING UP THE HONEYWELL VERSATILIS
SIGNAL SCOUT
Unpacking the Contents
NOTE: After unpacking the HVSS, it is recommended to check for
any visible damage to the filter on the face of the sensor. If the
filter is damaged then the sensor will not function as intended.
In such cases of damaged filter, contact HPS Technical Support
through your local Customer Contact Center.
The magnetic and adhesive mount adapters are supplied as kits
along with HVSS / HVSS - EH, if chosen the same while ordering.
The following table provides the contents of the HVSS / HVSS - EH
package, while ordering it with each adapter type:
Table 5-1: Contents in the Package
For HVSS
Ordered with
Adapter Type
Contents in the
Package
Accessories/ Tools (To be
handy with users)
Screw Mount HVSS / HVSS - EH
fitted with Screw
Mount Adapter
(Default Option).
l
M6 socket head cap
screw and M6 Nut
(based on the target
structure
requirements).
l
Allen key (for M6
socket head cap
screw) size: 5mm; and
its respective spanner
size: 10mm
l
The spanner
recommended for the
HVSS base is 41mm,
and for the Adapter is
32mm.
Magnetic HVSS / HVSS - EH,
The spanner
20