CHAPTER
2
INSTRUCTIONS AND SAFETY MEASURES
Precautions
The following precautions must be exercised to use the Honeywell
Versatilis™ Signal Scout™ and Honeywell Versatilis™ Signal Scout™ -
Energy Harvested, safely and effectively:
n
Honeywell will not provide any guarantee, if the HVSS is
disassembled.
n
The battery may present a potential electrostatic ignition hazard
when dissembled.
n
Improper use may lead to battery fluid leakage, excessive heat,
ignition, or explosion.
n
Honeywell will not be liable for any hazard that might be caused
due to negligence in handling the HVSS and HVSS - EH.
n
Care should be taken to protect the HVSS from impact or
abrasion if located in a Zone 0/Class I Div 1 environment.
n
It is the responsibility of the end user to verify that the HVSS has
the necessary approvals required for the intended area of use.
n
Ensure that the operating environment of the HVSS is consistent
with the appropriate hazardous location’s certification.
Hazardous locations
Honeywell Versatilis
TM
Signal Scout
TM
and Honeywell Versatilis
TM
Signal Scout
TM
- Energy Harvested are available with IECEx, ATEX,
UKCA Ex, North America Class I Div I and CCoE approvals.
For more information, see certifications section.
7
To Next Page
Loading...
