Best practices
Table 2-1: Best Practices - DOs
DOs
Ensure there is an adequate space to access the HVSS
before selecting an installation position.
The HVSS must be installed vertically perpendicular to the
target structure (like beams, frames, etc) for overall best
performance.
Ensure the target surface of the structure is free from
greasy, corrosion, abrasion, and uneven surfaces. So, the
magnetic adapter attaches firmly to the target surface,
thereby improving the measurement of frequency
response.
Ensure there are no damages, pigments, dents, or
Contortion to the surface of the HVSS base. Any such
deformations or pigments may affect performance and
measurement accuracy.
Ensure that there is no visible damage to the filter on the
face of the sensor, before installation. If the filter is
damaged then the sensor will not function as intended.
Dispose the HVSS and battery according to the local laws
and regulations.
Installation in an explosive environment must be under the
appropriate local, national, and international standards,
codes, and practices.
Whenever the maintenance activity is carried out on
Honeywell Versatilis™ Signal Scout™ - Energy Harvested,
ensure that it is cleaned to maintain the efficiency of the
PV cells.
8
Chapter 2 - Instructions and safety measures
To Next Page
Loading...
