Honeywell VISTA-128FBPT - Bypass Commands

53
3. In Worksheet 3, enter devices used on Auxiliary Power 2. Calculate standby and alarm currents, then add to
get Auxiliary Power 2 current subtotal.
Worksheet 3: Auxiliary Power 2 Current Load
Total Current
Device
Model #
Device Current X
# of Units
Standby Alarm
Auxiliary Power 2 Subtotal
(pin 5 on keypad port 2)
400mA max.
1.7A max.
4. In Worksheet 4, enter devices connected to the Bell 1 Output. Calculate alarm current then add to get the Bell
1 Output current subtotal.
Worksheet 4: Bell 1 Output Current Load
Total Current
Device
Model #
Device Current X
# of Units
Standby Alarm
XXXXXX
XXXXXX
XXXXXX
XXXXXX
XXXXXX
XXXXXX
XXXXXX
Bell 1 Output Subtotal
(terminals 3 & 4 – 1.7A max.)