Voyager XP User Guide 167
UTILITIES
Add a Test Code I.D. Prefix to All Symbologies
This selection allows you to turn on transmission of a Code I.D. before the decoded
symbology. (See the Symbology Charts, beginning on page 213) for the single
character code that identifies each symbology.) This action first clears all current
prefixes, then programs a Code I.D. prefix for all symbologies. This is a temporary
setting that will be removed when the unit is power cycled.
Show Decoder Library Version
Scan the barcode below to output the decoder library version.
Show Software Revision
Scan the barcode below to output the current software revision, unit serial number,
and other product information for both the scanner and the base.
Add Code I.D. Prefix to
All Symbologies (Temporary)
Show Decoder Library
Version
To Next Page
Loading...
Need help?
General