Voyager XP User Guide 15
USB HID
Scan the following code to program the scanner for USB HID barcode scanners.
USB Serial
Scan the following code to program the scanner to emulate a regular RS232-based
COM Port. If you are using a Microsoft® Windows® PC, you will need to download a
driver from the Honeywell website (sps.honeywell.com). The driver will use the next
available COM Port number. Apple® Macintosh computers recognize the scanner
as a USB CDC class device and automatically uses a class driver.
Note: No extra configuration (e.g., baud rate) is necessary.
CTS/RTS Emulation
ACK/NAK Mode
To Next Page
Loading...
Need help?
General