154 Voyager 1470/1472 User Guide
QR Code Page
QR Code pages define the mapping of character codes to characters. If the data
received does not display with the proper characters, it may be because the bar
code being scanned was created using a code page that is different from the one
the host program is expecting. If this is the case, scan the bar code below, select
the code page with which the bar codes were created (see ISO 2022/ISO 646
Character Replacements on page 220), and scan the value and the Save bar code
from the Programming Chart. The data characters should then appear properly.
Data Matrix
< Default All Data Matrix Settings >
Data Matrix On/Off
To Next Page
Loading...
