Voyager 1470/1472 User Guide 207
MAINTENANCE AND
TROUBLESHOOTING
Repairs
Repairs and/or upgrades are not to be performed on this product. These services
are to be performed only by an authorized service center (see Customer Support on
page xiii).
Maintenance
Your device provides reliable and efficient operation with a minimum of care.
Although specific maintenance is not required, the following periodic checks
ensure dependable operation:
Clean the Scanner
The scanner, scanner window, or base’s housing may be cleaned with a soft cloth or
tissue dampened with water (or a mild detergent-water solution.) If a detergent
solution is used, rinse with a clean tissue dampened with water only.
Inspect Cords and Connectors
Inspect the interface cable and connector for wear or other signs of damage. A
badly worn cable or damaged connector may interfere with scanner operation.
Contact your distributor for information about cable replacement. Cable replace-
ment instructions are on page 208.
Caution: Do not submerge the scanner in water. The scanner’s housing is
not watertight. Do not use abrasive wipes or tissues on the
scanner’s window. Abrasive wipes may scratch the window.
Never use solvents (e.g., acetone) on the housing or window.
Solvents may damage the finish or the window.
To Next Page
Loading...
