Honeywell Voyager XP 1470g Series - Data Matrix Code Page; Maxicode

Voyager 1470/1472 User Guide 155
Data Matrix Message Length
Scan the bar codes below to change the message length. Refer to Message Length
Description (page 114) for additional information. Minimum and Maximum
lengths = 1-3116. Minimum Default = 1, Maximum Default = 3116.
Data Matrix Code Page
Data Matrix Code pages define the mapping of character codes to characters. If the
data received does not display with the proper characters, it may be because the
bar code being scanned was created using a code page that is different from the
one the host program is expecting. If this is the case, scan the bar code below,
select the code page with which the bar codes were created (see ISO 2022/ISO 646
Character Replacements on page 220), and scan the value and the Save bar code
from the Programming Chart. The data characters should then appear properly.
MaxiCode
< Default All MaxiCode Settings >
MaxiCode On/Off
Minimum Message Length
Maximum Message Length
Data Matrix Code Page
On
* Off