Honeywell Voyager XP 1470g Series - RS232 Modifiers; RS232 Baud Rate

30 Voyager 1470/1472 User Guide
Turbo Mode: The scanner sends characters to a terminal faster. If the terminal drops
characters, do not use Turbo Mode. Default = Off.
Numeric Keypad Mode: Sends numeric characters as if entered from a numeric key-
pad. Default = Off.
Automatic Direct Connect Mode: This selection can be used if you have an IBM AT style
terminal and the system is dropping characters. Default = Off.
RS232 Modifiers
RS232 Baud Rate
Baud Rate sends the data from the scanner to the terminal at the specified rate.
The host terminal must be set for the same baud rate as the scanner. Default =
115200.
Windows Mode Prefix/Suffix
Turbo Mode On
* Turbo Mode Off
Numeric Keypad Mode On
* Numeric Keypad Mode Off
Automatic Direct Connect
Mode On
* Automatic Direct Connect
Mode Off