Honeywell Voyager XP 1470g Series - Scanner-Bioptic ACK;NAK Timeout

To Next Page

To Previous Page

36 Voyager 1470/1472 User Guide

Scanner-Bioptic ACK/NAK Timeout

This allows you to set the length (in milliseconds) for a timeout for a bioptic scan-

ner’s ACK/NAK response. Scan the bar code below, then set the timeout (from 1-

30,000 milliseconds) by scanning digits from the Programming Chart, then scan-

ning Save. Default = 5100.

ACK/NAK Timeout

Other manuals for Honeywell Voyager XP 1470g Series