• Event alarms set on your watch can be synced to the Health app. You can set a maximum of five
Event alarms.
• You can only set one Smart alarm for your watch.
• The Event alarm will ring at the specified time. If you set a tag for the Event alarm, the watch will
display the tag. Otherwise, only the time will be displayed.
• When an alarm rings, touch on your watch screen, press the up button, or swipe right on
your watch screen to snooze for 10 minutes. To turn off the alarm, touch on your watch
screen or press and hold the Up button.
• When an alarm rings, the alarm will automatically turn off after snoozing three times if no other
operations are performed.
• Currently, only alarms set on Honor phones running Magic UI 2.0 or later can be synced to the
watch.
Using Flashlight
From the home screen press the Up button, swipe until you find Flashlight, and then touch it to
turn on the flashlight. Touch the screen to turn off the flashlight and touch the screen again to
turn it on. Swipe right on your watch screen to exit Flashlight.
Using the Air pressure app
You can check the altitude and atmospheric pressure of your current location on your watch.
From the home screen press the Up button, swipe until you find Air pressure, and touch it to
check the altitude and air pressure of your current location and a graph showing atmospheric
changes of the current day.
Altitude:
Altitude measurement range: –800 to 8800 meters.
Air pressure:
Air pressure measurement range: 300 to 1100 hPa.
Swipe up or down to check altitude and air pressure respectively.
Using Compass
From the home screen press the Up button, swipe until you find Compass, touch it, and then
follow the onscreen instructions to calibrate it. After it is successfully calibrated, your watch will
display a compass dial.
Handy features
23
To Next Page
Loading...
