• If your watch does not respond after you touch to confirm the pairing request, press the Down
button and hold to unlock your watch, and initiate a pairing procedure again.
• Your watch will display an icon on the screen to inform you that pairing was successful. It will then
receive information (such as the date and time) from your phone.
• If the paring failed, your watch screen will display an icon to inform you that pairing was
unsuccessful. It will then return to the startup screen.
• A watch can be connected with only one phone at any given time, and vice versa. If you want to
pair your watch with another phone, disconnect your watch from the current phone using the
Health app, and then pair your watch with another phone using the Health app.
Powering on/off and restarting the watch
Powering on the watch
• When the watch is powered off, press and hold the Up button to power on the watch.
• When the watch is powered off, the watch will automatically power on if you charge it.
If you power on the watch when the battery level is critically low, the watch will remind you to
charge it and the watch's screen will turn off after 2 seconds. You will be unable to power on the
watch until you charge it.
Powering off the watch
• When the watch is powered on, press and hold the Up button, and then touch Power off.
• When the watch is powered on, press the Up button while on the home screen, swipe up or
down until you find Settings, touch it, go to System > Power off, and then touch √ to confirm.
• If the battery level is critically low, the watch will vibrate and then automatically power off.
Restarting the watch
• When the watch is powered on, press and hold the Up button, and then touch Restart.
• When the watch is powered on, from the home screen press the Up button, swipe until you find
Settings, touch it, go to System > Restart, and then touch √ to confirm your choice.
Force restarting the watch
• Press and hold the Up button for at least 16 seconds to force restart the watch.
Charging your watch
Charging
1 Connect the USB Type-C port and power adapter and then plug in the power adapter.
Getting started
3
To Next Page
Loading...
