• Raise wrist to wake screen
Connecting earbuds
1 From the home screen press the Up button and go to Settings > Earphones.
2 Your watch will search automatically for the Bluetooth earbuds list for pairing. Select the
name of your earbuds and follow the onscreen instructions to complete the pairing.
• If Bluetooth earbuds are connected via the watch and you answer a call from the watch, the audio
will play from the watch's speaker. Audio for calls cannot go through the earbuds yet.
• If you would like to use your Bluetooth earbuds for calls, connect the earbuds to your phone and
answer calls from your phone too.
Viewing the Bluetooth name and MAC address
To view the Bluetooth name and MAC address of your watch, use any of the following methods:
Method 1: On the home screen of your watch, press the Up button and go to Settings > About.
The Device name is your watch's Bluetooth name. The 12 alphanumeric characters under MAC
are your watch's MAC address.
Method 2: Your watch's MAC address is laser engraved on the back of the watch. The 12
alphanumeric characters next to "MAC:" are your watch's MAC address.
Method 3: Connect the watch to the phone and view the MAC address in the Health app.
Check the watch's version
From the home screen press the Up button, swipe until you find Settings, touch it, then touch
About, and your watch's version information will be displayed.
Check the watch's SN
From the home screen press the Up button, swipe until you find Settings, touch it, then touch
About, and your watch's SN (serial number) will be displayed under SN.
More guides
26
To Previous Page
Loading...
