5 Commissioning
Rotary actuators 135 • M140 • M150 • M180
Operating instructions Version 2.0 - June 2012 23
5.4 Commissioning
1 Check whether all fitting and assembly work has been competently finished.
4 Assembly on page 11
2 Ensure that the actuation of the rotary actuator can take place safely without
putting people or devices at risk.
3 Ensure that the rotary actuator is attached correctly and that the rotary actuator’s
hood is closed.
4.4 Assembling/disassembling a hood on page 13
4 Ensure that the rotary actuator is set to automatic mode.
6.1 Changing between manual and automatic mode on page 24
5 Ensure that the final position switches are set correctly.
5.1 Setting a limit position switch on page 20
6 Apply supply voltage. The rotary actuator is ready for operation.
To Next Page
Loading...
