9
DES I G N IN S P IRAT I ON
*The mentioned manufacturers and product names are trademarks or registered trademarks of the respective owners. The trademarks were used merely to identify the sound character of this product.
Bluetooth Modeling Amplifier
This model is based on the legendary Demeter® TRM-
1 Tremulator®* tremolo pedal. Featuring deep, pulsing
optical tremolo sound, it recreates the classic tremolo
effect found on many vintage amps but with a greater
range of speed and depth.
You can use Tap Tempo function to control the effect
speed by turning on the Sync switch. When the Sync
switch is on, turn the Rate/Div knob to set a proper tap
divide value. The default value is 1/4 (no division).
Depth: Controls the effect depth
Rate/Div: Controls the effect speed/tap division value
Sync: Switches Tap Tempo sync on/off
This model is a sweet-sounding bitcrusher/sample rate
reducer with full control over the bit resolution and
sample rate. Use the low pass filter and high pass
filter onboard to get your own sound variations.
Mix: Controls the wet/dry signal ratio of the effect
Krush: Controls the sample rate of the effect
Bit: Controls the bit resolution of the effect
Hi Cut/Lo Cut: Controls the high/low cut filter cutoff
frequency
This model is an auto swell effect that creating a
violin-like tone. Two parameters make it simple.
Attack: Controls how fast the effect swells the input
signal
Curve: Selects the volume swell curve
PRE
To Next Page
Loading...
