16
DES I G N IN S P IRAT I ON
*The mentioned manufacturers and product names are trademarks or registered trademarks of the respective owners. The trademarks were used merely to identify the sound character of this product.
Bluetooth Modeling Amplifier
This model is based on the legendary Ampeg® SVT*
bass amp head. Born in 1969, the rich sounding all-
tube monster basically defined the bass sound of rock
and roll from then on. We modified the Frequency
switch with a modern Ampeg®* design for more tonal
flexibility.
Gain: Controls the gain amount
Master: Controls the effect output
Midrange: Selects the center frequency of Midrange
control: 220Hz/450Hz /800Hz/1.6kHz/3kHz
Bass/Middle/Treble: 3-band EQ that controls the effect
tone
This model is based on the sound characteristics of the
legendary VOX®* AC-100* amp head, the amp that
McCartney was using in 1965. The operation is simple:
just treble, bass, and volume controls. Using a violin
bass with this amp will totally get you THAT vibe.
Volume: Controls the output volume (post gain)
Bass/Treble: 2-band EQ that controls the effect tone
This model is based on the legendary Ampeg® B-15*
"Flip Top" bass amp head. Originally designed by Jess
Oliver, the easy-to-use amp produces incredible round,
full-figured tone for which many have deemed it the
holy grail of bass amps. Now it's finally within reach!
Volume: Controls the effect output
Bass/Treble: 2-band EQ that controls the effect tone
This model is based on the legendary Alembic™ F-2B*
rack-mount bass preamp. It recreates the rich, magical
tube sound that made the F-2B* a classic. This
treatment is not just for bass– it's awesome on guitars
(think Gilmour) and more!
Volume: Controls the effect output
Bright: Switches extra brightness on/off
Bass/Middle/Treble: 3-band EQ that controls the effect
tone
This model is an acoustic preamp based on the famous
AER® Colourizer 2*, which makes dull sounds come
alive by enriching your acoustic sound with full
dynamics and harmonics.
Volume: Controls the effect output
Tone Mix: Controls the tone control balance; set to 0 to
disable tone control
Tone Depth: Controls the tone brightness
EQ Freq: Controls the EQ center frequency from 90Hz to
1.6kHz
EQ Q: Controls the EQ bandwidth
EQ Gain: Controls the EQ boost/cut amount; set to 50 to
keep neutral
Enhancer: Controls tone enhancement amount; turn to
minimum (off) to disable enhancer
This model is an acoustic preamp based on the famous
AER® Colourizer 2*, which makes dull sounds come
alive by enriching your acoustic sound with full
dynamics and harmonics.
Volume: Controls the effect output
Tone Mix: Controls the tone control balance; set to 0 to
disable tone control
Tone Depth: Controls the tone brightness
EQ Freq: Controls the EQ center frequency from 680Hz to
11kHz
EQ Q: Controls the EQ bandwidth
EQ Gain: Controls the EQ boost/cut amount; set to 50 to
keep neutral
Enhancer: Controls tone enhancement amount; turn to
minimum (off) to disable enhancer
AMP
To Next Page
Loading...
