27
DES I G N IN S P IRAT I ON
*The mentioned manufacturers and product names are trademarks or registered trademarks of the respective owners. The trademarks were used merely to identify the sound character of this product.
Bluetooth Modeling Amplifier
FX 1
This model is a sweet-sounding bitcrusher/sample rate
reducer with full control over the bit resolution and
sample rate. Use the low pass filter and high pass
filter onboard to get your own sound variations.
Mix: Controls the wet/dry signal ratio of the effect
Krush: Controls the sample rate of the effect
Bit: Controls the bit resolution of the effect
Hi Cut/Lo Cut: Controls the high/low cut filter cutoff
frequency
This model is an auto swell effect that creating a
violin-like tone. Two parameters make it simple.
Attack: Controls how fast the effect swells the input
signal
Curve: Selects the volume swell curve
This is an envelope filter designed for guitars, offering
you a wide range of tonal variety. Set the Sense,
Range, and Q parameters to fit your instrument and
playing style.
Sense: Controls the effect sensitivity
Range: Controls the filter frequency range
Q: Controls the filter sharpness
Level: Controls the output level
This is an envelope filter designed for basses, offering
you a wide range of tonal variety. Set the Sense,
Range, and Q parameters to fit your instrument and
playing style.
Sense: Controls the effect sensitivity
Range: Controls the filter frequency range
Q: Controls the filter sharpness
Level: Controls the output level
Designed for for both guitars and basses, this auto
wah has many parameters for shaping the tone of your
wah sound. Start with the frequency range adjustment
to decide the basic flavor of your wah-wah.
You can use Tap Tempo function to control the effect
speed by turning on the Sync switch. When the Sync
switch is on, turn the Rate/Div knob to set a proper tap
divide value. The default value is 1/4 (no division).
Depth: Controls the effect depth
Rate/Div: Controls the effect speed/tap division value
Low/High: Controls the filter frequency range
Volume: Controls the effect output
Q: Controls the filter sharpness
Sync: Switches Tap Tempo sync on/off
This model is a stereo digital delay that produces a
pure clean delay sound, clear and accurate.
You can use Tap Tempo function to control the delay
time by turning on the Sync switch. When the Sync
switch is on, turn the Time/Div knob to set a proper tap
divide value. The default value is 1/4 (no division).
Mix: Controls the wet/dry signal ratio
FB: Controls the amount of feedback
Time/Div: Controls the delay time/tap division value of
left channel
Time R%: Controls the delay time of right channel (time
ratio of left channel)
Spread: Controls the effect stereo width
Level: Controls the effect output
Sync: Switches Tap Tempo sync on/off
To Next Page
Loading...
