Hotone PULZE - CAB Simulators

17
DES I G N IN S P IRAT I ON
*The mentioned manufacturers and product names are trademarks or registered trademarks of the respective owners. The trademarks were used merely to identify the sound character of this product.
Bluetooth Modeling Amplifier
FX Title
Description
Parameters & Ranges
CAB
Guitar S
Gibby 1x10
This model is an Based on the sound characteristics of
a Gibson®* 1x10" cabinet.
Volume: Controls the output volume
Low Cut/High Cut: Cuts the low/high frequency
Tweed 1x10
This model is an IR based cab simulator based on the
sound characteristics of a vintage Fender® Tweed*
1x10" combo cabinet.
Tweed 1x12
This model is an IR based cab simulator based on the
sound characteristics of a vintage Fender® Tweed*
1x12" combo cabinet.
Black 1x12
This model is an IR based cab simulator based on the
sound characteristics of a Fender®* 1x12" combo
cabinet.
UK 1x12
This model is an IR based cab simulator based on the
sound characteristics of a Marshall®* 1x12" cabinet.
Tang 1x12
This model is an IR based cab simulator based on the
sound characteristics of a Orange® PPC112* 1x12"
cabinet.
Voxy 1x12
This model is an IR based cab simulator based on the
sound characteristics of a Vox® AC15* 1x12" combo
cabinet.
Black 2x12
This model is an IR based cab simulator based on the
sound characteristics of a Fender® Blackface Twin
Reverb* 2x12" combo cabinet.
Voxy 2x12
This model is an IR based cab simulator based on the
sound characteristics of a Vox® AC30* 2x12" combo
cabinet.
Jazz 2x12
This model is an IR based cab simulator based on the
sound characteristics of the famous "JC clean" 2x12"
cabinet.
Stone 2x12
This model is an IR based cab simulator based on the
sound characteristics of a Two-Rock®* 2x12" cabinet.
Match 2x12
This model is an IR based cab simulator based on the
sound characteristics of a Matchless®* 2x12" cabinet.
UK 2x12
This model is an IR based cab simulator based on the
sound characteristics of a Marshall®* 2x12" cabinet.
CAB