Hotone PULZE - 页 20

19
DES I G N IN S P IRAT I ON
*The mentioned manufacturers and product names are trademarks or registered trademarks of the respective owners. The trademarks were used merely to identify the sound character of this product.
Bluetooth Modeling Amplifier
FX Title
Description
Parameters & Ranges
CAB
Guitar L
Messe 4x12
This model is an IR based cab simulator based on the
sound characteristics of a Mesa/Boogie®* 4x12"
cabinet.
Volume: Controls the output volume
Low Cut/High Cut: Cuts the low/high frequency
Rector 4x12A
This model is an IR based cab simulator based on the
sound characteristics of a Mesa/Boogie® Rectifier®
Standard 4x12"* cabinet.
Rector 4x12B
This model is an IR based cab simulator based on the
sound characteristics of a Mesa/Boogie® Rectifier®
Traditional 4x12"* cabinet.
Eddie 4x12
This model is an IR based cab simulator based on the
sound characteristics of an EVH®* 4x12" cabinet.
Boger 4x12
This model is an IR based cab simulator based on the
sound characteristics of a Bogner®* 4x12" cabinet.
Engle 4x12
This model is an IR based cab simulator based on the
sound characteristics of an ENGL®* 4x12" cabinet.
Soloist 4x12
This model is an IR based cab simulator based on the
sound characteristics of a Soldano®* 4x12" cabinet.
Tang 4x12
This model is an IR based cab simulator based on the
sound characteristics of an Orange® PPC412* 4x12"
cabinet.
Dizzle 4x12
This model is an IR based cab simulator based on the
sound characteristics of a Diezel®* 4x12" cabinet.
Bass
Flip Top 1x15
This model is an IR based cab simulator based on the
sound characteristics of an Ampeg® B-15N* 1x15"
cabinet.
Volume: Controls the output volume
Low Cut/High Cut: Cuts the low/high frequency
Worker 1x15
This model is an IR based cab simulator based on the
sound characteristics of a SWR® Workingman's*
1x15" cabinet.
Ampage
2x10
This model is an IR based cab simulator based on the
sound characteristics of an Ampeg® SVT-210AV*
2x10" cabinet.
CAB