Hotone PULZE - 页 19

18
DES I G N IN S P IRAT I ON
*The mentioned manufacturers and product names are trademarks or registered trademarks of the respective owners. The trademarks were used merely to identify the sound character of this product.
Bluetooth Modeling Amplifier
FX Title
Description
Parameters & Ranges
CAB
Guitar S
Glacian 2x12
This model is an IR based cab simulator based on the
sound characteristics of a Bogner® Shiva* 2x12"
cabinet.
Volume: Controls the output volume
Low Cut/High Cut: Cuts the low/high frequency
Superstar
2x12
This model is an IR based cab simulator based on the
sound characteristics of a Gibson®* 1x10" cabinet.
Messe 2x12
This model is an IR based cab simulator based on the
sound characteristics of a Mesa/Boogie®* 2x12"
cabinet.
Rector 2x12
This model is an IR based cab simulator based on the
sound characteristics of a Mesa/Boogie® Rectifier*
2x12" cabinet.
Guitar L
Tweed 4x10
This model is an IR based cab simulator based on the
sound characteristics of a Fender® Tweed* 4x10"
cabinet.
Volume: Controls the output volume
Low Cut/High Cut: Cuts the low/high frequency
UK 4x10
This model is an IR based cab simulator based on the
sound characteristics of a Marshall® 1965B* 4x10"
cabinet.
Glacian 4x10
This model is an IR based cab simulator based on the
sound characteristics of a Bogner® Shiva* 4x10"
cabinet.
UK 4x12A
This model is an IR based cab simulator based on the
sound characteristics of a Marshall® 1960A* 4x12"
cabinet.
UK 4x12B
This model is an IR based cab simulator based on the
sound characteristics of a Marshall® 1960B* 4x12"
cabinet.
UK 4x12C
This model is an IR based cab simulator based on the
sound characteristics of a vintage Marshall®* 4x12"
cabinet.
UK 4x12D
This model is an IR based cab simulator based on the
sound characteristics of a famous UK-style boutique
4x12" cabinet.
UK T75 4x12
This model is an IR based cab simulator based on the
sound characteristics of a Marshall®* 4x12" cabinet
with four Celestion® G12T-75* speakers.
CAB