7
DES I G N IN S P IRAT I ON
*The mentioned manufacturers and product names are trademarks or registered trademarks of the respective owners. The trademarks were used merely to identify the sound character of this product.
Bluetooth Modeling Amplifier
This model produces a flanger effect with negative
feedback, sounds like deep in the water, very unique
flanging tone.
You can use Tap Tempo function to control the effect
speed by turning on the Sync switch. When the Sync
switch is on, turn the Rate/Div knob to set a proper tap
divide value. The default value is 1/4 (no division).
Depth: Controls the effect depth
Rate/Div: Controls the effect speed/tap division value
Pre Dly: Controls the pre delay time
FB: Controls the amount of feedback
Sync: Switches Tap Tempo sync on/off
This model is a rebirth of the super rare all-analog
vintage vibrato pedal, which gives you a classic vibrato
sound with true analog warmth. With simple DEPTH
and RATE controls, it's easy to tweak your own unique
texture, from slight vibes to a full-on wobble.
You can use Tap Tempo function to control the effect
speed by turning on the Sync switch. When the Sync
switch is on, turn the Rate/Div knob to set a proper tap
divide value. The default value is 1/4 (no division). by
turning on the Sync switch. When the Sync switch is
on, turn the Rate/Div knob to set a proper tap divide
value. The default value is 1/4 (no division).
Depth: Controls the effect depth
Rate/Div: Controls the effect speed/tap division value
Sync: Switches Tap Tempo sync on/off
This model recreates the warm, rich analog phase
sound of the legendary MXR® M101 Phase 90* pedal.
Born in 1974, the one-knob orange phaser is an icon
that has found a place on millions of pedal boards for
over four decades.
You can use Tap Tempo function to control the effect
speed by turning on the Sync switch. When the Sync
switch is on, turn the Rate/Div knob to set a proper tap
divide value. The default value is 1/4 (no division).
Rate/Div: Controls the effect speed/tap division value
Sync: Switches Tap Tempo sync on/off
This model produces a sharp phase effect with a wide
range from very slow to fast speed. This unique
phasing sound has become popular among lots of
musicians since 1977.
You can use Tap Tempo function to control the effect
speed by turning on the Sync switch. When the Sync
switch is on, turn the Rate/Div knob to set a proper tap
divide value. The default value is 1/4 (no division).
Depth: Controls the effect depth
Rate/Div: Controls the effect speed/tap division value
Sync: Switches Tap Tempo sync on/off
PRE
To Next Page
Loading...
