30
DES I G N IN S P IRAT I ON
*The mentioned manufacturers and product names are trademarks or registered trademarks of the respective owners. The trademarks were used merely to identify the sound character of this product.
Bluetooth Modeling Amplifier
FX 2
This model is a stereo digital delay that produces a
pure clean delay sound, clear and accurate.
You can use Tap Tempo function to control the delay
time by turning on the Sync switch. When the Sync
switch is on, turn the Time/Div knob to set a proper tap
divide value. The default value is 1/4 (no division).
Mix: Controls the wet/dry signal ratio
FB: Controls the amount of feedback
Time/Div: Controls the delay time/tap division value of
left channel
Time R%: Controls the delay time of right channel (time
ratio of left channel)
Spread: Controls the effect stereo width
Level: Controls the effect output
Sync: Switches Tap Tempo sync on/off
This model is a stereo analog delay that captures the
sound of a vintage analog delay machine: warm and
natural, just like old times!
You can use Tap Tempo function to control the delay
time by turning on the Sync switch. When the Sync
switch is on, turn the Time/Div knob to set a proper tap
divide value. The default value is 1/4 (no division).
Mix: Controls the wet/dry signal ratio
FB: Controls the amount of feedback
Time/Div: Controls the delay time/tap division value of
left channel
Time R%: Controls the delay time of right channel (time
ratio of left channel)
Spread: Controls the effect stereo width
Level: Controls the effect output
Sync: Switches Tap Tempo sync on/off
This is a stereo analog delay model that captures the
sound of a BBD based analog delay machine that is
warm, smooth, rounded due to the limitation of BBD
chips.
You can use Tap Tempo function to control the delay
time by turning on the Sync switch. When the Sync
switch is on, turn the Time/Div knob to set a proper tap
divide value. The default value is 1/4 (no division).
Mix: Controls the wet/dry signal ratio
FB: Controls the amount of feedback
Time/Div: Controls the delay time/tap division value of
left channel
Time R%: Controls the delay time of right channel (time
ratio of left channel)
Spread: Controls the effect stereo width
Level: Controls the effect output
Sync: Switches Tap Tempo sync on/off
Level: Controls the effect output
Sync: Switches Tap Tempo sync on/off
This is a stereo delay model that captures the
characteristics of the sound of a tape echo machine.
Just plug in and play, and time flows back!
You can use Tap Tempo function to control the delay
time by turning on the Sync switch. When the Sync
switch is on, turn the Time/Div knob to set a proper tap
divide value. The default value is 1/4 (no division).
Mix: Controls the wet/dry signal ratio
FB: Controls the amount of feedback
Time/Div: Controls the delay time/tap division value of
left channel
Time R%: Controls the delay time of right channel (time
ratio of left channel)
Spread: Controls the effect stereo width
Level: Controls the effect output
Sync: Switches Tap Tempo sync on/off
This model is a multi-tap delay that brings you
expanded sound spaciousness.
1, 2 stands for different tonal variations.
You can use Tap Tempo function to control the delay
time by turning on the Sync switch. When the Sync
switch is on, turn the Time/Div knob to set a proper tap
divide value. The default value is 1/4 (no division).
Mix: Controls the wet/dry signal ratio
FB: Controls the amount of feedback
Time/Div: Controls the delay time/tap division value
Level: Controls the effect output
Mod: Controls the effect modulation amount
Tone: Controls the effect tone
Sync: Switches Tap Tempo sync on/off
To Next Page
Loading...
