Hotone PULZE - EQ Settings; Guitar EQ 1; Guitar EQ 2; Bass EQ 1

22
DES I G N IN S P IRAT I ON
*The mentioned manufacturers and product names are trademarks or registered trademarks of the respective owners. The trademarks were used merely to identify the sound character of this product.
Bluetooth Modeling Amplifier
EQ
FX Title
Description
Parameters & Ranges
EQ
EQ
Guitar EQ 1
This is an equalizer made for guitar. You can use this 5-
band EQ to control your sound, eliminate unwanted
feedback, and expand your tone.
Band 1: 125Hz
Band 2: 400Hz
Band 3: 800Hz
Band 4: 1.6kHz
Band 5: 4kHz
Use the five bands above to control the EQ level.
Volume: Controls the output level
Guitar EQ 2
This is an equalizer made for guitar. You can use this 5-
band EQ to control your sound, eliminate unwanted
feedback, and expand your tone.
Band 1: 100Hz
Band 2: 500Hz
Band 3: 1kHz
Band 4: 3kHz
Band 5: 6kHz
Use the five bands above to control the EQ level.
Volume: Controls the output level
Bass EQ 1
This is an equalizer made for bass. You can use this 5-
band EQ to control your sound, eliminate unwanted
feedback, and expand your tone.
Band 1: 33Hz
Band 2: 150Hz
Band 3: 600Hz
Band 4: 2kHz
Band 5: 8kHz
Use the five bands above to control the EQ level.
Volume: Controls the output level
Bass EQ 2
This is an equalizer made for bass. You can use this 5-
band EQ to control your sound, eliminate unwanted
feedback, and expand your tone.
Band 1: 50Hz
Band 2: 120Hz
Band 3: 400Hz
Band 4: 800Hz
Band 5: 4.5kHz
Use the five bands above to control the EQ level.
Volume: Controls the output level
V-EQ
Our V-EQ is an equalizer based on the legendary
Mesa/Boogie®* 5-band graphic EQ module found on
Mesa/Boogie® Mark™* Series amps. Put this classic
EQ right before your amp or distortion and hear the
magic.
Band 1: 80Hz
Band 2: 240Hz
Band 3: 750Hz
Band 4: 2.2kHz
Band 5: 6.6kHz
Use the five bands above to control the EQ level.
Graphic EQ
This is a 10-band equalizer suitable for any instrument.
Band 1: 31Hz
Band 2: 63Hz
Band 3: 125Hz
Band 4: 250Hz
Band 5: 500Hz
Band 6: 1kHz
Band 7: 2kHz
Band 8: 4kHz
Band 9: 8kHz
Band 10: 16kHz
Use the ten bands above to control the EQ level by
±12dB.
Volume: Controls the output volume