Hotone PULZE - 页 33

32
DES I G N IN S P IRAT I ON
*The mentioned manufacturers and product names are trademarks or registered trademarks of the respective owners. The trademarks were used merely to identify the sound character of this product.
Bluetooth Modeling Amplifier
FX Title
Description
Parameters & Ranges
FX 2
Reverb
Hall
This reverb model recreates the spaciousness of a
concert hall.
Mix: Controls the wet/dry signal ratio
Pre Dly: Controls the amount of time between the dry
signal and the audible onset of early reflections and the
reverb tail
Decay: Controls the duration of reverb time
Low Damp/Hi Damp: Dampens the effect low/high
frequency amount
Mod: Controls the effect modulation amount
Plate
This reverb model simulates a plate reverberator.
Mix: Controls the wet/dry signal ratio
Pre Dly: Controls the amount of time between the dry
signal and the audible onset of early reflections and the
reverb tail
Decay: Controls the duration of reverb time
Low Damp/Hi Damp: Dampens the effect low/high
frequency amount
Mod: Controls the effect modulation amount
Spring
This reverb model simulates the sound coming from a
vintage tube driven spring reverb unit.
Mix: Controls the wet/dry signal ratio
Pre Dly: Controls the amount of time between the dry
signal and the audible onset of early reflections and the
reverb tail
Decay: Controls the duration of reverb time
Low Damp/Hi Damp: Dampens the effect low/high
frequency amount
Mod: Controls the effect modulation amount
Shimmer
This reverb model creates a lush, shimmering reverb
sound.
Mix: Controls the wet/dry signal ratio
Pre Dly: Controls the amount of time between the dry
signal and the audible onset of early reflections and the
reverb tail
Decay: Controls the duration of reverb time
Low Damp/Hi Damp: Dampens the effect low/high
frequency amount
Mod: Controls the effect modulation amount
Cloud
This reverb model creates a huge, thick reverb effect
like curly clouds in the sky.
Mix: Controls the wet/dry signal ratio
Pre Dly: Controls the amount of time between the dry
signal and the audible onset of early reflections and the
reverb tail
Decay: Controls the duration of reverb time
Low Damp/Hi Damp: Dampens the effect low/high
frequency amount
Mod: Controls the effect modulation amount
FX 2