INSTALLATION MANUAL 35
CombiSlim II
Detergent and rinse connection
CHEMICAL MONITOR SETUP
The chemical function will monitor the usage of the detergent and the rinse aide levels. The
oven will alert the user when the chemical canisters need replacing.
Chemical set up procedure
1. Press the on/o button to switch on the oven
2. Select: the gearwheel in the upper righthand corner.
Do not place the containers above the bottom of oven.
• At the back of the oven near the rigth side, connect the blue hose to the fitting with
the blue sticker and to the rinse aid container.
• At the back of the oven near rigth side, connect the red hose to the fitting with the
red sticker and to the detergent container.
• The length of the hose for detergent and rinse may never exide 130CM.
• If there is a need for hoses longer then 130CM to the detergent and rinse canisters,
a CombiWash Logistig system is required.
To Next Page
Loading...
