44 INSTALLATION MANUAL
TOOLS FOR GAS ADJUSTMENT
FLUE GAS ANALYZER AND GAS DETECTOR
It is a HOUNÖ requirement that you use a flue gas analyzer that can measure both CO and
O
2
%.
HOUNÖ recommends the following flue gas analyzer and gas detector: Econ CN-P and
Econ LSG
You can order the flue gas analyzer and gas detector from HOUNÖ by ordering spare part
no. 32720027. Note that the default language of the gas analyzer is English.
FLUE GAS ADAPTOR
HOUNÖ recommends the use of a specially designed adaptor to ensure correct measuring
of the flue gas from the gas oven.
If this flue gas adaptor is not used, incorrect measurements may occur.
You can order the flue gas adaptor from HOUNÖ by ordering spare part no. 32710055.
If you order the recommended flue gas analyzer and gas detector, the gas adaptor is
included. Order spare part no. 32720027.
GAS PRESSURE METER
HOUNÖ recommends the use of a gas pressure meter to ensure the correct inlet gas
pressure.
HOUNÖ recommends the following gas pressure meter: Ecom UNO
You can order the gas pressure meter from HOUNÖ by ordering spare part no.32700189.
To Next Page
Loading...
