5–54 Maintenance and Service Guide
Removal and Replacement Procedures
1. Prepare the notebook for disassembly (refer to Section 5.3)
and remove the following components:
❏ MultiBay device (refer to Section 5.6)
❏ Keyboard (refer to Section 5.9)
❏ Memory shield (refer to Section 5.11)
❏ Switch cover (refer to Section 5.12)
❏ Keyboard plate (refer to Section 5.13)
❏ Fan assembly (refer to Section 5.15)
❏ Heat sink (refer to Section 5.16)
❏ Display assembly (refer to Section 5.18)
❏ Top cover (refer to Section 5.19)
❏ LED board (refer to Section 5.21)
❏ Button board (refer to Section 5.22)
To Next Page
Loading...
