HP Compaq nc6000 - Notebook PC User Manual

Product Description
Maintenance and Service Guide 1–21
4 Display lid switch*
■ If the notebook is closed while on, turns
off the display.
■ If the notebook is opened while on,
turns on the display.
5 Power button* When the notebook is:
■ Off, press and release to turn on the
notebook.
■ In Standby, press and release to exit
Standby.
■ In Hibernation, press and release to
exit Hibernation.
If the system has stopped responding and
Windows shutdown procedures cannot be
used, press and hold for 5 seconds to turn
off the notebook.
6 QuickLock button Disables the keyboard and pointing device
and clears the display.
7 Wireless On/Off button Enables and disables the integrated
wireless device(s) on the notebook.
✎
When using the Wireless On/Off
button to enable integrated WLAN
or Bluetooth, first ensure that
WLAN or Bluetooth has been
enabled in the software and that
the wireless on/off light is on
before attempting to make a
connection.
*This table describes default settings. For information about changing the
functions of the display lid switch and power button and about using Standby
and Hibernation, refer to the “Power” chapter in the
Software Guide on the
Documentation Library CD .
Table 1-6
Top Components
(Continued)
Item Component Function

HP Compaq nc6000 - Notebook PC Specifications

General

Processor	Intel Pentium M
Chipset	Intel 855PM
Storage	30 GB to 60 GB HDD
Hard Drive Interface	ATA-100
Battery	6-cell Lithium-Ion
Operating System	Windows XP Professional
RAM	256 MB, upgradable to 2 GB
Graphics	ATI Mobility Radeon 9600
Display	14.1-inch
Display Resolution	1024 x 768 or 1400 x 1050
Optical Drive	DVD-ROM, CD-RW/DVD Combo, or DVD±RW
Networking	10/100/1000 Ethernet
Ports	2 x USB 2.0, VGA, parallel, serial, headphone, microphone