IDENtify
Command :MMEMory:IDENtify? [<msus>]
The IDENtify query is available with version 1.01 or higher of the HP 16500C
operating system only. Version 1.00 does not recognize this query.
The IDENtify query returns the serial number of the disk in the specified
drive. This number is unique for disks created with DOS version 4.0 or
higher. For other disks, the number returned is usually 0.
Returned Format
VOLUME SERIAL #: <serial_num>
The IDENtify query always returns the initial string "VOLUME SERIAL #: " and has
no response header.
<msus> Mass Storage Unit specifier. INTernal0 for the hard disk drive and
INTernal1 for the flexible disk drive.
<serial_num> An eight-digit hexadecimal number
MMEMory Subsystem
IDENtify
12–13
To Next Page
Loading...
Need help?
General
