INPort
Command :INTermodule:INPort {{ON|1}|{OFF|0}}
The INPort command causes intermodule acquisitions to be armed from the
Port In, the same as Group Run Armed from PORT IN in the Intermodule
menu. A value of 0 removes Port In from the Group Run.
In version 1.02 and later of the operating system software, you can set Group
Run with OR TRIGGER by setting INPort to 2.
Example OUTPUT XXX;":INTERMODULE:INPORT ON"
Query :INTermodule:INPort?
The INPort query returns the current Group Run setting. A value of 2 means
that the Group Run is set to Group Run with OR TRIGGER.
Returned Format [:INTermodule:INPort] {2|1|0}<NL>
Example OUTPUT XXX;":INTERMODULE:INPORT?"
INTermodule Subsystem
INPort
13–8
To Next Page
Loading...
