HP 1650B

XTIMe
XTIMe
Command Syntax:
where:
c time-value >
Example:
Query Syntax:
Returned Format:
Example:
HP 1650B/HP 16518
Programming Reference
command/query
The XTIMe command positions the X marker in time when the marker
mode is TIME. If data is not valid, the command performs no action.
The XTIMe query returns the X marker position in time. If data is not
valid, the query returns 9.9E37.
:MACHine{ l(2):TWAVeform:XTIMe c time-value >
.. - real number from -2.5Ks to +2.5Ks
..-
OUTPUT XXX; “:MACHlNEl:TWAVEFORM:XTIME 40.0E-6”
:MACHine{l IP}:TWAVeform:XTIMe?
[:MACHine{ 1 IP}:TWAVeform:XTIMe]
<time-value > c NLs
10 DIM Xt$ [lOO]
20 OUTPUT )(XX;“:MACHINE1:TWAVEFORM:XlIME?”
30 ENTER W Xt$
40 PRINT Xt$
50 END
TWAVeform Subsystem
19-29