HP 3325B User Manual

Data Entry And Modification
□ a°o
□ “ □ °a
a
a°a‘
D°a'
0
o o
o o
a
rtSmCDCD®
CD E3 CD [Z1
ffiDCDDDGDS
tcD m CD d] e
o o
d
□
The Data Keys
KElDCDCZ]©
ts CD CD CD ©
’WCD CD Q © @
Entering setup values with the numeric keypad is a simple three step
process:
1. Select a parameter to change.
2. Enter the desired value (most significant digit first).
3. End the entry with a units key.
For example, to change the output amplitude to 1 Vrms, press the [Amptd] (amplitude) key to
^plitude value. Press the [1] key in the numeric keypad, and press the
r5^ entry. For the example, the Vrms units from the
[Hz / V RMS] units key is assigned to the data value. The HP 3325B assigns the units to the
copesponds to the parameter being changed. If an entered value exceeds the
HP 3325B range limits, the HP 3325B ignores the entered value and displays an error,
message (refer to table 1-4). To cancel an incomplete data entry, press any key that requires
the display for data entry (see table 1-3).
I Table 1-3. Parameters Acceptinq Data Fntrv
Amptd
Mod Source Freq
Bus Adrs
Phase
DC Offset
Start Freq
FStep
Stop Freq
Freq
Store
Mkr Freq
Recall
Mod Source Amptd
Time
1-12

HP 3325B Specifications

General

Brand	HP
Model	3325B
Category	Portable Generator
Language	English