HP 3325B User Manual

Operation and Reference
The Entry Keys
-.
I—^ ° ^
'-' 0 0
0
0
L
0
o
o
0
o 0 0
0 0 0
a
n°a°a°
o c
fHHHi fNTSr
r— "160 SOlKC* ——,
Ztro t
roonao
"OaODD
KDonao
^ □ D D a
□ □
DO
□ ° □ “[
6
□
o
□
o
□ a
^0
i
4
■ {§) °0
° (§)n
4-
Note
An illuminated indicator adjacent to an entry key denotes it as the active entry
Darameter. For example, if the [Freq] entry key indicator is illuminated, it is not
necessary to press that key before entering data.
Frequency
o P® (Frequency) key enables display, entry or modification of the
frequency of the signal output. The indicator adjacent to the [Freq] key
illuminates when the output frequency value is displayed. Frequency values
are displayed in Hertz and changed with the numeric ke 3 q 3 ad and units keys
or modified with the modify controls. The MHz, kHz, and Hz units allow
convenient entry of frequency values.
^ frequency entry is 1 ^Hz for frequencies below 100 kHz, and 1 mHz for
shove. At 100 kHz and above, 1 fMz resolution is possible through the use of
t^ 1 btep parameter. Also, as a modify key is used to cross above the 100 kHz boundary, anv
^Hz resolution value is maintained but not displayed. Frequency ranges are dependent upon
the function selected and high voltage option (see table 1-5). During a frequency change, the
mam output signal is phase-continuous; that is, there are no phase discontinuities in the
output waveform.
Table 1-5. Frequency Limits
Function
Main Signal
Sine
Square
Triangle, Ramps
0 20 999 999.999 Hz
0-* 10 999 999.999 Hz
0-* 10 999.999 999 Hz
1-16

HP 3325B Specifications

General

Brand	HP
Model	3325B
Category	Portable Generator
Language	English