Chapter 4 Command Reference
Introduction
Programming Guide 4-39
:DISPlay[:WINDow]:TEXT:RADix COMMa | DPOint
Sets or queries the character used to separate integral and fractional portions of a
displayed number.
To conform to the numerical convention used in the USA, specify decimal point
with DPOint. To conform to the numerical convention used in many other
countries, specify COMMa.
For example:
With DPOint, one thousand is displayed as 1,000.0
With COMMa, one thousand is displayed as 1.000,0
A sequence of ASCII-encoded bytes: DPO or COMM
This value is stored in non-volatile memory. It is unaffected by
power-on, save/recall, and *RST.
Utility/POWER
Query Response
Comments
Related
Front-Panel
Keys
To Next Page
Loading...
