HP 5920 Configuration Guide

144
length, and it does not include the header length. An HTTP packet with this field indicates that the packet
data does not include the multipart type and the packet body is a data type.
The status code of the HTTP packet is a three-digit field in decimal notation, and it includes the status
information for the HTTP server. The first digit defines the class of response, and the last two digits do not
have any categorization role.
Configure the HTTP server before you perform the HTTP operation.
To configure the HTTP template:
Ste
p
Command Remarks
1. Enter system view.
system-view N/A
2. Create an HTTP template and
enter its view.
nqa template http name N/A
3. Specify the URL of the
destination HTTP server.
url url
Enter the URL in one of the following
formats:
• http://host/resource.
• http://host:port/resource.
4. Specify an HTTP login username.
username username
By default, no HTTP login username is
specified.
5. Specify an HTTP login password.
password { cipher | simple }
password
By default, no HTTP login password is
specified.
6. Specify the HTTP operation type.
operation { get | post | raw }
By default, the HTTP operation type is
get, which means obtaining data from
the HTTP server.
In the HTTP raw operation, use the
raw-request command to specify the
content of the GET request to be sent to
the HTTP server.
7. (Optional.) Enter raw request
view.
raw-request
This step is required for the raw
operation.
Every time you enter the raw request
view, the previously configured
content of the GET request is removed.
8. (Optional.) Enter or paste the
content of the GET request for the
HTTP operation.
N/A
This step is required for the raw
operation.
By default, no contents are specified.
9. (Optional.) Save the input and
exit to HTTP template view.
quit N/A
10. (Optional.) Specify the source
IPv4 or IPv6 address for the
probe packets.
• IPv4 address:
source ip ip-address
• IPv6 address:
source ipv6 ipv6-address
By default, no source IP address is
specified.
The source IP address must be the IP
address of a local interface, and the
interface must be up. Otherwise, no
probe packets can be sent out.
11. (Optional.) Configure the
expected status codes.
expect status status-list
By default, no expected status code is
configured.

HP 5920 Specifications

General

Brand	HP
Model	5920
Category	Switch
Language	English