EasyManua.ls Logo

HP 5920

HP 5920
322 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
207
Ste
p
Command
Remarks
3. (Optional.) Set the interval
for identifying a kernel
thread deadloop.
monitor kernel deadloop time interval [ slot
slot-number ]
The default is 8 seconds.
4. (Optional.) Disable kernel
thread deadloop detection
for a kernel thread.
monitor kernel deadloop exclude-thread
tid [ slot slot-number ]
After enabled, kernel thread
deadloop detection monitors
all kernel threads by default.
Configuring kernel thread starvation detection
CAUTION:
Inappropriate configuration of kernel thread starvation detection can cause service problems or system
breakdown. Make sure you understand the impact of this confi
g
uration on your network before you do it.
Starvation occurs when a thread is unable to access shared resources.
Kernel thread starvation detection enables the system to detect and report thread starvation. If a thread
is not executed within a specific interval, the system considers that a starvation has occurred, and
generates a starvation message.
Thread starvation does not impact system operation. A starved thread can automatically run when
certain conditions are met.
To configure kernel thread starvation detection:
Ste
p
Command
Remarks
1. Enter system view.
system-view N/A
2. Enable kernel thread
starvation detection.
monitor kernel starvation enable [ slot
slot-number ]
By default, the function is
disabled.
3. (Optional.) Set the interval
for identifying a kernel
thread starvation.
monitor kernel starvation time interval [ slot
slot-number ]
The default is 120 seconds.
4. (Optional.) Disable kernel
thread starvation detection
for a kernel thread.
monitor kernel starvation exclude-thread
tid [ slot slot-number ]
After enabled, kernel thread
starvation detection monitors
all kernel threads by default.
Displaying and maintaining kernel threads
Execute display commands in any view and reset commands in user view.
Task Command
Display kernel thread deadloop information.
display kernel deadloop show-number [ offset ] [ verbose ]
[ slot slot-number ]
Display kernel thread deadloop detection
configuration.
display kernel deadloop configuration [ slot slot-number ]
Display kernel thread exception information.
display kernel exception show-number [ offset ] [ verbose ]
[ slot slot-number ]

Table of Contents

Other manuals for HP 5920

Related product manuals