To Next Page

To Previous Page

Outputting logs to the console

Ste

Command

Remarks

1. Enter system view.

system-view N/A

2. Enable the information center.

info-center enable

By default, the information center is

enabled.

3. Configure an output rule for

the console.

info-center source { module-name |

default } { console | monitor |

logbuffer | logfile | loghost }

{ deny | level severity }

For information about default

output rules, see "Default output

rules for logs."

4. (Optional.) Configure the

timestamp format.

info-center timestamp { boot | date

| none }

By default, the timestamp format is

date.

5. Return to user view.

quit N/A

6. Enable log output to the

console.

terminal monitor The default setting is enabled.

7. Enable the display of debug

information on the current

terminal.

terminal debugging

By default, the display of debug

information is disabled on the

current terminal.

8. (Optional.) Set the lowest

severity level of logs that can

be output to the console.

terminal logging level severity

The default setting is 6

(informational).

Outputting logs to the monitor terminal

Monitor terminals refer to terminals that log in to the device through the VTY line.

To output logs to the monitor terminal:

Ste