35
6
Connecting Asynchronous Devices
Overview
This section explains how to connect a DTC to asynchronous devices, gives a list of
recommended cables, explains how to make your own cables, lists the cables you
should use to connect to the most common devices, and gives useful advice for
adapting to popular cabling systems. You will also find descriptions of the cables
necessary for connecting to an X.25 network, plus product numbers for supported
LAN cables and transceivers.
Rear view of a DTC 16xx with example connections
This example illustrates a ThinLAN connection (AUI port unused). The option to
have a combination of one 8-port RJ45 panel and one Modem Distribution Panel is
shown. The standard product (HP J2060A, J2062A) is supplied with two 8-port
RJ45 panels.
To Next Page
Loading...
Need help?
General