I
-
I
-
General Safety Considerations
WARNING
Before this
instrummt
is
switched on, make sure it has been properly
grounded through the protective conductor of the ac power cable to a
socket outlet provided with protective earth contact.
This is a Safety Class I product (provided with a protective earthing
ground incorporated in the power cord). Any interruption of the
protective (grounding) conductor, inside or outside the instrument, or
disconnection of the protective earth terminal can result in personal
injury.
WARNING
No operator serviceable parts inside the instrument. Refer servicing to
qualified personnel. To prevent electrical shock, do not remove covers.
Any adjustments or service procedures that require operation of the
instrument with protective covers removed should be performed only by
trained service personnel.
WARNING
For continued protection against fire hazard, replace line fuse only
with the same type and rating (F
6.3A/250V).
The use of other fuses or
material is prohibited.
CAUTION
If this instrument is used in a manner not specihed by Hewlett-Packard Co.,
the protection provided by the instrument may be unpaired.
CAUTION
Always use the three-pronged ac power cord supplied with this instrument.
Failure to ensure adequate earth grounding by using this cord may cause
instrument damage.
CAUTION
This instrument has automatic selection input. Be sure the supply voltage is
within the speciEed range.
. . .
Xlll