HP 83751A User Manual

I
-
Error Messages
SCPI Error Messages
Parsing and Compatibility Errors
301
- 178, “Expression data not allowed;C[ l-41: No External Crystal
Marker Allowed(301)”
Indicates that one of the commands “Cl”, “C2”, “C3”, or “C4”
were detected while the instrument was using the HP 8350
compatible language. These commands are accepted but no action
is taken because the instrument does not have this feature.
302 -178, “Expression data not allowed;CA: No Amplitude Crystal
Marker Allowed(302)”
Indicates that the command “CA” was detected while the
instrument was using the HP 8350 compatible language. These
commands are accepted but no action is taken because the
instrument does not have this feature.
303 - 178, “Expression data not allowed;CI: No Intensity Crystal
Markers Allowed(303)”
Indicates that the command “CI” was detected while the
instrument was using the HP 8350 compatible language. These
commands are accepted but no action is taken because the
instrument does not have this feature.
304 - 178, “Expression data not allowed;DP: Display Blanking is always
ON(304)”
Indicates that the command “DP” was detected while the
instrument was using the HP 8350 compatible language. These
commands are accepted but no action is taken because the
instrument does not have this feature.
305
-178, “Expression data not allowed;IX, OX: No Micro Learn
Strings Allowed(305)”
Indicates that the commands “IX” or “OX” were detected while
the instrument was using the HP 8350 compatible language.
These commands are accepted but no action is taken because the
instrument does not have this feature.
16-25

HP 83751A Specifications

General

Brand	HP
Model	83751A
Category	Blower
Language	English