HP 83751A User Manual

I
-
I
-
Error Messages
SCPI Error Messages
306
- 178, “Expression data not allowed;NT: Network Analyzer Trigger
Ignored(306)”
Indicates that the command “NT” was detected while the
instrument was using the HP 8350 compatible language. These
commands are accepted but no action is taken because the
instrument does not have this feature.
307
- 178, “Expression data not allowed;RP: RF Blanking Is Always
ON(307)”
Indicates that the command “RP” was detected while the
instrument was using the HP 8350 compatible language. These
commands are accepted but no action is taken because the
instrument does not have this feature.
308
- 178, “Expression data not allowed;SHCF: No Coarse CW
Resolution Allowed(308)”
Indicates that the command “SHCF” was detected while the
instrument was using the HP 8350 compatible language. These
commands are accepted but no action is taken because the
instrument does not have this feature.
309
-178, “Expression data not allowed;SHDF: No Fine CW Resolution
Allowed(309)”
Indicates that the command “SHDF” was detected while the
instrument was using the HP 8350 compatible language. These
commands are accepted but no action is taken because the
instrument does not have this feature.
310
-178, “Expression data not allowedSHM2, SHM3: No Counter
Interface(310)”
Indicates that the commands “SHMB” or “SHM3” were detected
while the instrument was using the HP 8350 compatible language.
These commands are accepted but no action is taken because the
instrument does not have this feature.
16-26

HP 83751A Specifications

General

Brand	HP
Model	83751A
Category	Blower
Language	English