I
-
I
-
Special Functions
15
-
This function allows you to select the instrument programming language:
LANGUAGE
either SCPI or HP 8350 compatible.
NOTE
Your language selection may or may not be retained if line power to the instrument is lost, depending
upon the rear-panel language selection switch. For information on setting the rear panel switch refer
to the
“HP-I!3
Switch” section of Chapter 7 in this manual, or refer to the
lnstallafion
and
Buick
Starr
Guide for more detailed instructions on setting this switch.
Associated SCPI Commands
SYStem:LANGuage SCPI
Sets the instrument programming
language to
SCPI.
SYStem:LANGuage COMP
Sets the instrument programming
language to HP 8350 compatible.
15-20
To Next Page
Loading...
General