I
-
I
-
Special Functions
l OR by using the keypad to enter the number of the desired function and
then pressing HZ/S/ENTER .
Once the H~/S/ENTER key has been pressed, the selected special function
becomes the active parameter in the MARKER/SWEEP/STATUS display. If
the special function’s selections consist of discrete states (i.e. On/Off or
Int/Ext/None), then the
a
(3l-J
keys or the front panel knob must be used to
select the desired state. If the special function is a numerical value, then the
keypad may also be used to enter the value. If the keypad is used to enter a
value, the value must be terminated with one of the units keys.
Pressing the
cc)
key after a parameter has been viewed or changed, returns
you to the main menu and you can then scroll through the special functions
or enter another special function number.
The special functions in this chapter are organized numerically. See
‘Ihble
15-l
for a numerical listing of the functions.
15-3
To Next Page
Loading...